 |
↓MOUNTING↓ ↓ADJUSTMENT↓ INSTRUCTIONS (Printable Version) |
 |
 |
The ERGONAV® adjustable mouse platform is made of durable, High Impact ABSi Plastic. Velcro Straps are used to mount the ERGONAV® to the arm of a desk chair. The UNIVERSAL MOUNT system will not damage the chair or arm. Since it is a simple matter of putting together or pulling apart 3 Velcro Straps, the ERGONAV® can easily be moved from your desk chair at home to your desk chair at the office. | |||
| ||||
 (Bottom View) |
← ← ← STEP 1 Route Velcro straps through the slots as shown in photo 1. ← ← ← See close-up |
(Bottom View)
|
← ← ← STEP 1a
Route Velcro straps through the slots as shown in photo/step 1a. See close-up |
|
← ← ← STEP 2 Position the non-skid strip on the armrest on which you will attach your ERGO NAV. (No Adhesive required.) See close-up ← ← photo 2. |
 |
← ← ← STEP 3 Place the ERGO NAV on top of the armrest as shown. Pull the straps tight around the armrest securing the Velcro ends together. See ← photo 3 close-up . |
 |
|
|
|
Side to side tilt angle shown in figure 1 is accomplished by loosening the knob labeled "A" in in figure 4. The tilting shown in figure 2 requires loosening the knobs labeled "B" in figure 4. The adjustment shown in figure 3 requires the removal of knob "A" and reattaching the platform with one of the mounting holes next to knob "A". Knobs must be loosened before any adjustments are made and re-tightened prior to use. The ERGO NAV's platform should be tilted slightly downward and away from your seating position for your comfort. | |
| CAUTION: Never force the mouse platform into position. Loosen, adjust and tighten the adjustment point(s) as needed. Never put unnecessary downward force on the platform. | ||